Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Evergreen, CA
Garage door installation in Evergreen means matching a new door to a home built between the 1960s and 1990s, where original single-piece tilt-ups and early steel sectionals are hitting the end of their service life. The marine layer that rolls over the East Foothills overnight and burns off into hot, dry afternoons puts real stress on steel tracks, springs, and panels. Granite Garage Door Repair has served Evergreen since 2017, and we handle replacement, opener work, and full mechanical repair. Call (877) 265-9458 for a free estimate on any door project.
Why Evergreen Homes Are Different
Evergreen sits in a climate pocket that works garage doors harder than most of the South Bay. Overnight, cool damp air from the Bay pushes in and settles over the neighborhoods. By early afternoon, that same door is baking under foothill sun. The daily temperature swing forces metal tracks to expand and contract, springs to flex, and wood-composite panels to absorb moisture then dry out rapidly. We see rust on steel hardware and warped panel edges here far sooner than in drier inland cities.
The housing stock compounds it. Most Evergreen garages are attached two-car structures on suburban tract and ranch-style homes from the 1960s through the 1990s. A surprising number still run original builder-grade torsion springs and single-piece tilt-up doors. Those springs were rated for roughly 10,000 cycles, and most of them passed that number years ago. When they let go, it is rarely a slow failure.
Terrain matters too. West-facing doors on hillside streets above the golf course catch the full weight of afternoon sun. The panels fade, the paint breaks down, and heat builds up inside the garage. We replace those panels years before the shaded doors just a few blocks downhill. The microclimate difference within a single Evergreen ZIP code, 95148, is measurable, and it changes how we spec a new door or a spring set.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Evergreen Services
When an Evergreen homeowner calls us, the conversation is usually about one of two things: a door that will not open or close properly, or an opener that stopped responding. Both have dedicated pages below.
Garage Door Repair in Evergreen
Repair work in Evergreen skews toward the failures this climate creates: rusted cables, misaligned tracks from daily thermal movement, and springs that snap without warning. We identify the exact brand and panel system on your door before touching a component, because a Clopay door does not take the same hardware as a Raynor. From broken springs to a door off its tracks, we quote the price before any work starts. Full details are on our Garage Door Repair in Evergreen page.
Garage Door Opener Repair in Evergreen
Openers here deal with the same heat, and we find that motor capacitors and logic boards fail earlier in attached garages that trap afternoon heat. We also work on the unit itself, not just the remote, which matters when a LiftMaster or Chamberlain myQ opener will not pair with a phone or hold its travel limits. Whether it is a chain-drive unit from the 1990s or a modern Wi-Fi opener, we diagnose the actual opener in your garage. See our Garage Door Opener Repair in Evergreen page for specifics.
Garage Door Installation in Evergreen
Garage door installation in Evergreen usually means replacing a 30-to-50-year-old original door on a 1960s to 1990s tract or ranch home. The marine layer and intense afternoon sun have taken their toll on steel tracks, wood-composite panels, and tired torsion hardware. A full replacement removes the accumulated problems at once, and we walk you through brand, insulation level, and panel style before ordering anything. If you are weighing a repair against a replacement, we will tell you which one actually makes sense, and you can see our full installation scope on the Garage Door Installation page.
Garage Door Replacement
Signs you need it
Panel rot, deep rust on the door sections, or a door that slams shut or binds even after hardware repairs are signs the door itself is done.
What it costs in Evergreen
A full new door installation in Evergreen ranges from $700 to $2,200 depending on size, insulation, and brand.
How we do it
We measure the opening, remove the old door and track, install new track, sections, springs, and hardware, then balance and test the complete system.
Garage Door Installation Service
Signs you need it
A new home purchase with a missing or badly damaged door, or a renovation that changes the garage opening, means a ground-up installation.
What it costs in Evergreen
New garage door installation in Evergreen runs $700 to $2,200, with opener installation adding $250 to $550 if needed.
How we do it
We set the track, hang the door sections, install spring assemblies and cables, then run the opener and safety sensors before final balancing.
Garage Door Seal Installation
Signs you need it
Daylight showing under the door, water staining on the garage floor, or drafty air around the door edges means the bottom seal or perimeter weatherstripping has failed.
What it costs in Evergreen
Bottom seal and weatherstripping work typically falls within the broader garage door repair range of $150 to $600.
How we do it
We pull the old seal, clean the retainer channel, and install a fresh bottom seal and side weatherstripping sized to your door brand and thickness.
What Garage Door Installation Costs in Evergreen
| Item | Typical range in Evergreen |
|---|---|
| New garage door installation | $700 – $2,200 |
| Opener installation (with new door) | $250 – $550 |
| Panel replacement | $250 – $500 |
How long does garage door installation take in Evergreen?
Most single-door replacements are completed in one day. Custom-ordered doors add lead time, and we confirm the schedule before any work begins.
Will the price change once you see the door?
No. We quote the full job after measuring and inspecting your opening, and that price is agreed before work starts. Call (877) 265-9458 to schedule a free measure.
Brands We Service in Evergreen
Your brand, our specialty. Granite works factory-familiar with LiftMaster, Chamberlain, Genie, Raynor, and the rest of the eight major garage door and opener manufacturers we support. We stock brand-matched springs, cables, rollers, and opener parts locally, so most Evergreen repairs do not wait on a parts order. For a full list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Evergreen, CA
| Service | Typical range in Evergreen |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| General garage door repair | $150 – $600 |
In Evergreen, the two factors that push a job toward the top of a range are rust-damaged hardware from the marine layer and the extra labor on hillside garages with poor access. Whatever the number, you get it in writing before we start, and it does not change once we begin.
Neighborhoods We Serve in Evergreen
We cover all of Evergreen, from the hillside streets above the golf course to the flatter tract-home blocks along the valley floor. Our techs are familiar with the housing eras and door styles in each pocket, which shortens diagnosis time.
- Evergreen Valley
- The Villages
- Silver Creek
- Montgomery Heights
- Norwood
Most Evergreen calls get a same-day or next-day visit, and we carry common springs, cables, rollers, and opener parts on the truck to finish most repairs in one trip.
Service Area – Cities Near Evergreen
Granite Garage Door Repair works across the eastern San Jose foothills and the surrounding valley communities. If you are in Berryessa, CA, Central San Jose, CA, Spartan Keyes, CA, or Downtown San Jose, CA, we can usually reach you with the same stocked trucks and brand-specific parts.
Serving Evergreen, CA – Our Local Coverage Area
We’re based in the Evergreen area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Evergreen
Yes. We cover every neighborhood in 95148, including the hillside streets where access and sun exposure change the repair approach. Same-day and next-day visits are standard for most of the area.
Some Evergreen HOAs, especially in newer planned pockets, require doors to match a specific panel style or color. We work with your board’s requirements and can spec a door that meets them. Call (877) 265-9458 with your HOA guidelines and we will confirm what fits.
We can give you a range over the phone, but an exact price requires measuring the opening and seeing the existing hardware. Estimates are free, and the quoted price is locked before work starts.
If your Evergreen garage door needs repair, opener work, or a full replacement, call (877) 265-9458 for a free estimate. We know the doors, the brands, and the climate, and we will tell you straight whether to fix or replace.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Evergreen Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Eduardo Herrera"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Ruben Vargas"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Katie Mercer